The TN11G1P is a 23-gauge pin nailer that is capable of driving 1/2” to 1-3/8” pins into dense hardwoods like oak without splitting the material or requiring any touch-up work. Featuring SENCO’s oil-less design, the tool does not require routine lubrication, which saves you time and allows you to get right to work.
1-3/8” 23 GAUGE PIN NAILER
MSRP $169.00
- Oil-less design eliminates the need for routine lubrication
- Dry fire lockout reduces tool wear and indicates when to reload
- Ultra-narrow nosepiece allows access to tight corners and other hard to reach areas
- Reversible belt hook mounts to either side of the tool
- No-mar pad prevents damage to the worksurface
The TN11G1P is a 23-gauge pin nailer that is capable of driving 1/2” to 1-3/8” pins into dense hardwoods like oak without splitting the material or requiring any touch-up work. Featuring SENCO’s oil-less design, the tool does not require routine lubrication, which saves you time and allows you to get...
Features
1
OIL-LESS DESIGN
Routine lubrication is not required. Saving you time with daily maintenance
2
DRY FIRE LOCKOUT
Limits tool wear and indicates the need to reload fasteners
3
ULTRA-NARROW NOSEPIECE
Easy access to tight corners and other hard to reach areas
4
REVERSIBLE BELT HOOK
Mounts to either side of the tool for right or left-handed use
5
NO-MAR PAD
Protects the worksurface from being scratched or damaged. Extra no-mar pad included.
6
REAR EXHAUST WITH EMBEDDED MUFFLER
Directs air away from the operator and worksurface
7
DUAL TRIGGER
Added safety to prevent accidental fires
8
MAGAZINE ADJUSTS TO FASTENERS
Automatically conforms to fit different pin lengths
9
METAL MAGAZINE
Increased durability
10
SWIVEL PLUG
For added maneuverability
11
ALUMINUM MAINBODY
Durable and lightweight
12
ON BOARD WRENCH
To remove front plate for easy jam clearance
Applications
- Fine woodworking
- Molding
- Decorative trim
SPECIFICATIONS
- Item #: TN11G1P
- Tool Weight: 2.3 lbs (1.0 kgs)
- Height: 7.5" (191 mm)
- Length: 7.5" (191 mm)
- Width: 1.9" (48 mm)
- Warranty: 5 years
- Technology: PNEUMATIC
- Trigger Type: Sequential Dual Trigger
- Capacity: 100
- Diameter: 0.025"
- Range: 1/2" - 1-3/8"
- Power Type: Pneumatic
- Operating Pressure: 70-100 PSI (4.8-6.9 Bar)
- Air Consumption: 1.1 SCFM
- Air Inlet NPT: 1/4"
- Includes: Carrying Case, 1/4" Fitting
FASTENERS
Compatible Fasteners
Learn More
How to Find Replacement Parts for Your Pneumatic Tool
How do I find a parts diagram for my nailer? Should I use OEM or aftermarket nail gun parts? Get these answers and more. These days, when something breaks, the default solution is to throw it away and buy new....
read more
